Switch(config)#boot system įinally, we have to save the configuration using the write memory command and restart the device using the reboot command. We have to do this, because otherwise the old version of IOS would be loaded. The last step is to configure the switch to load the new version of IOS.
Source filename ? ĭestination filename ?ġ3013140 bytes copied in 11.04 secs ( 1183012 bytes/sec) Configure the switch to load the new IOS version.Īddress or name of remote host ? x.x.x.x.Use the copy ftp flash command and follow the wizard.To do this, create an username and password by using the ip ftp username and ip ftp password.
As we mentioned before you have to provide the username and password that were already created on the FTP server.In order to use FTP transfers the following steps are required: In comparison to TFTP, FTP supports authentication, and you will need to provide a valid FTP server username and password. Enterprise Wireless: Cisco Products Overview.Select Answer yes to any confirmation prompts.Select Overwrite existing capture file.
Note the use of a forward slash in the filename to specify a subfolder within the TFTP Download folder. %ctGroupName/%ctDeviceName-Config.txt: the file name to store config to on server.192.168.1.200: the IP address of remote TFTP server.Select List of commands to be entered on device and enter the following code: copy running tftp.Enter a name and description, for example "Download Cisco IOS config to TFTP".This example demonstrates how to use the commands activity to download the current running configuration of a Cisco IOS device to a TFTP server.
How to download Cisco IOS running config to TFTP server
0 kommentar(er)
